Thermal energy (such as hot water, low pressure steam or heat conduction oil) goes through an airtight layer, heat passes to the drying material through the inner wall. Under power driven, the tank shall slowly rotate, tank material will unceasingly mix, thus achieving the goal of strengthening drying effect. Materials are in the vacuum state, the vapor pressure drop will make material surface moisture (solvent) reach saturation condition and evaporate, and exhaust recycling could be realized by the vacuum pump in a timely manner. Materials inner moisture (solvent) will infiltrate and discharge continuously to the surface, the material shall achieve drying in a short time.

Name	Gross volume	100	350	500	750	1000	1500	2000	3000	4500
Gross volume	L	100	350	500	750	1000	1500	2000	3000	4500
working volume	L	50	175	250	375	500	750	1000	1500	2250
heated area	m²	1.16	2	2.63	3.5	4.61	5.58	7.5	9.6	23.8
rotate speed	rpm	6	6	6	6	6	6	6	4	4
power	kw	1.1	2.2	4	5.5	7.5	7.5	11	15	22
rotation height	mm	1600	1930	2060	2160	2260	2760	3160	3500	4150
in-tank design pressure	Mpa	-0.09～-0.096
interlayer design pressure	Mpa	0.3