Choosing an organic fertilizer mixer is the key. Due to the viscosity of organic fertilizers, water-based additives need to be added, which leads to a relatively heavy specific gravity of the materials. General mixers cannot meet the production requirements of organic fertilizers, and equipment needs to be manufactured according to the characteristics of the materials.

  Organic fertilizers are mainly used in the cultivation of organic vegetables and crops. They are rich in organic matter and nutrients necessary for crop growth. They can not only provide the nutrients needed for crop growth, improve soil quality, but also enhance crop quality, increase crop yield, promote high and stable crop yields, maintain soil fertility, and at the same time improve fertilizer utilization rate and reduce production costs.

  The helical ribbon mixer has been upgraded in terms of motor power, stirring shaft and mixing blades on the basis of the original model, which can meet the requirements of mixing and stirring materials with higher viscosity. The design of the discharge port adopts a large butterfly valve for discharging materials, allowing the viscous fertilizer to be easily discharged from the mixer. Feeding - Powder materials are directly conveyed into the mixer by belt conveyors, while water-based additives are pumped into the agitator. The output is 4 to 8 tons per hour.

  The helical ribbon mixer has the following features

  It is composed of a U-shaped container, helical ribbon stirring blades and transmission components.

  2. The U-shaped long cylinder structure enables the mixed materials (powder, semi-fluid) to move within the cylinder with low resistance.

  3. The forward and reverse rotating screws are installed on the same horizontal shaft, forming a low-power mixing environment. The helical blades are generally made in double or triple layers. The outer spiral gathers the materials from both sides to the center, while the inner spiral conveys the materials from the center to both sides, which can create more vortices in the flow of the materials. The mixing speed has been accelerated and the uniformity of the mixture has been enhanced.

  4. The helical ribbon mixer is a new type of stirring and mixing equipment featuring high uniformity, high loading coefficient, low pollution and low breakage.

  5. This product has a wide range of applications and can be used for the stirring and mixing of powder with powder and powder with liquid. It can also stir paste-like, viscous or relatively heavy materials (such as putty, real stone paint, metal powder, etc.). It is widely applied in fields such as pharmaceuticals, food, pesticides, dyes, chemicals, plastics, ceramics, coatings, putties, and mortars.