The transmission part of the horizontal plow blade mixer is composed of components such as the motor, cycloidal pinwheel reducer, coupling, and plow blade shaft. The horizontal cylindrical body is used for holding materials. Several holes are opened on the cylinder body for feeding and discharging materials as well as for observation. The plow blade shaft support seat is fixed on the cover plates at both ends of the cylinder. The plough blade assembly consists of a plough blade, a plough blade arm and a main shaft. The plough blade is installed on the main shaft by the plough blade arm and is made into a halve structure for easy disassembly and assembly. The flying knife assembly consists of multiple flying knives, which are directly driven by a motor and installed on the side of the cylinder. The discharge valve is installed at the bottom of the cylinder (except for continuous discharge), and is used to close and discharge the material. The liquid spraying device of the mixer is fixed above the cylinder, and the nozzles are agricultural spray heads, which can spray well.
After the horizontal plow blade mixer is started, the plow blades are driven to rotate by the plow blade shaft, causing the materials to flow circumferentially along the radial direction of the cylinder, and at the same time, the materials are thrown out along the normal directions of both sides of the plow blades. When the thrown and circumferentially turbulent material flows through the flying knife assembly, it is scattered by the high-speed rotating flying knives. Under the combined action of the above-mentioned plow knife and flying knife, the materials are continuously stacked and diffused, achieving uniform mixing in a short time with high mixing accuracy. For materials that require solid-liquid mixing, the mixed liquid is evenly sprayed onto the moving materials in the cylinder through the liquid spraying device.
Nowadays, many chemical units install and use horizontal plow blade mixers. This equipment product can be used for material mixing and processing. During operation, its performance is stable. As long as users can add materials according to the proportion, it can ensure uniform mixing. Therefore, the application of horizontal plow blade mixing equipment is widespread now. The demand for such equipment in the chemical industry is also constantly increasing. In these working industries, the use of horizontal plow blade mixing equipment can achieve processing goals in a timely manner and is also responsible for completing the mixing operations of various materials. Therefore, the chemical industry attaches great importance to the application of the equipment.
At present, the horizontal plow blade mixer not only has significant applications in the chemical industry, but can also be seen in food processing sites and paint factories. In the mining industry, the installation and use of horizontal plow blade mixing equipment can also be used for solid-liquid mixing processing. In addition, this equipment is fully functional, and users can also carry out concentration and drying processes through the equipment. These are all the operation procedures that are frequently carried out in processing and production units.
When using a horizontal plow blade mixer, the materials will rotate driven by the equipment. These materials will also move in one direction and be thrown outward under the action of external force. This process is repeated. Therefore, after the equipment has been running for a period of time, the materials can be fully mixed. When the mixing operation process is completed, no residual waste will be produced. Therefore, the working efficiency of the horizontal plow blade mixing equipment is high.
During the normal operation of the horizontal plow blade mixer for material mixing and processing, the staff should pay attention to the proportion of the materials, as the proportion method of the materials directly determines the processing effect.
